|
|
Control of house heating
Hnyk, Marek ; Šandera, Josef (referee) ; Šteffan, Pavel (advisor)
The aim of the final thesis is a proposal and implementation of a system which would enable a heating control on the basis of data gathered by monitoring of particular rooms inside a building. In particular, it is focused on water measurement within the heating system, TUV (non-potable hot water) and the temperature within the space of residential rooms. The system headquarters must enable an automated saving of the measured data. Selected temperature figures will be made accessible by a web interface and continuously saved on the web server.
|
|
|
Lighthouse for maritime communication
Chadima, Jan ; Mašek, Pavel (referee) ; Pospíšil, Jan (advisor)
This bachelor thesis deals with design and construction of lighthouse model, which will be used for teachning. It describes types of naval signalizacion, which are established by organization IALE in decree E-110. In thesis is described Arduino platform, metods of 3D printing and used materials For model needs was designed printed circuit board with microcontroller ATmega328P, which control RGB LED. Program, which control model, was writed on Arduino platform. Program has nine modes of sea light comunication. It can change periode, color of LED, brightness and turning on power saving mode. The result of this work is a functional model of lighthouse powerd by battery. Model is based on Green Cape Lighthouse in Australia in scale 1:58.
|
|
|
Radio Controled Tracked Vehicle Model
Ctibor, Jiří ; Knobloch, Jan (referee) ; Klíma, Bohumil (advisor)
The aim of the bachelor thesis is the design and creation of manufacturing documentation DC drive for the tracked vehicle model with remote control, its design, programing and inspirit. To create a manufacturing documentation it’s needed to be familiar with the design program for printed circuit boards Altium Designer. Program of the microprocessor will be created in CodeWarrior development environment in the C language. To design circuits were used generally datasheets of components. The proposal consists of several functional peripheral units that provide various functions needed. For control the circuit is used a digital signal processor aimed at applications in the motor drives.
|
|
|
Remote control of low voltage curcuit-breaker
Brtnický, Jiří ; ABB, Stanislav Korčián, (referee) ; Bajer, Arnošt (advisor)
The work deals with design and contruction of the extension module remote control, through which the starter motor is remotely controlled. On the basis of specified input parameters such as size, engine type, engine power, voltage, etc., is given control module design, which includes a control unit (microprocessor) for remote control of motor drive and assessment of motor starters. The work also includes analysis of the problems of mechanical transmission, depending on the management and selection of an engine. This work is finished with the physical realization of a prototype control program by drawing a flowchart and manufacture of printed circuit boards with subsequent recovery and testing.
|
|
|
Remote Control for Home Automation
Polgár, Václav ; Kočí, Radek (referee) ; Hanáček, Petr (advisor)
This bachelor's thesis deals with design and implementation of system for remote control of home appliances. The resulting control system involves the simple application that uses Bluetooth wireless technology to communicate with hardware components which can operate the appliances working on the infra principle.
|
|
|
Vision system implementation on Bioloid robot
Ropog, József ; Marada, Tomáš (referee) ; Věchet, Stanislav (advisor)
Tato bakalářská práce se zabývá implementací systému vidění na dvounohý humanoid robot ze stavebnice Bioloid. Systém vidění je složen z bezdrátové kamery, která je namontovaná na robotovi a z řídícího počítače. Cílem této práce bylo zkonstruovat a oživit humanoidního robota, vytvořit systém vidění a bezdrátový komunikační systém. V centru je robot, který pomocí bezdrátové komunikace současně odesílá i přijímá údaje. Tento systém nabízí skvělé schopnosti na další rozšíření.
|
|
|
Tracked vehicle for working on a slope
Těšický, Petr ; Urbánek, Michal (referee) ; Kašpárek, Jaroslav (advisor)
This bachelor thesis deals with the conceptual design of a remotely controlled tracked vehicle for work on a slope. In the first part, a short research analysis of remotely controlled tracked vehicles is performed. During the design of the concept itself, dimensional, force and power calculations are performed. The design of some components is based on these calculations. Strength calculations for certain components are performed in the last part of this work. The result is a conceptual design of a remotely controlled tracked vehicle.
|
|
|
Remote wireless control with encoded transmission
Polách, Matěj ; Hanák, Pavel (referee) ; Szabó, Zoltán (advisor)
This thesis deals with a wireless transmissions issues. It describes the device designing which communicate bidirectionally in free frequency band of 2.4 GHz. It deals with the modulation methods, coding and other wireless transmissions necessities and about prefabricated RF modules properties. It solves voltage level shifting which is essential for SPI communication between microcontroler and module.
|
|
|
Design of electrical travel of reaper`s drive unit
Otoupalík, Jan ; Černý, Michal (referee) ; Koutný, Daniel (advisor)
This bachelor thesis focuses on the design of electrical travel for universal mowing machine, which will be controlled remotely. Designed travel has independent wheel drive, the maximum speed of 10 km per hour and can be used in the terrain with a slope of 30°. The thesis deals with the determination the parameters of the travel, design of the possible electrical drive units and design with respect to the stability of the device. Another part of the thesis deals with the design of the travel and describes particular parts of the travel.
|
|
|
Computer Remote Control Using Cell Phone
Kolařík, Jan ; Ševcovic, Jiří (referee) ; Pospíchal, Petr (advisor)
The result of my work is an appilcation, which enables to control videos and music by a cell phone, which has an operating system Android 2.1. The application is divided into two parts, the server, which runs on PC, and the client, which runs on the cell phone. For description of managing the applications is used JavaScript.
|
guest ::
